Multirotors
Beitian BN-220H GPS
Multirotors → GPS Modules → Beitian BN-220H GPSFeatures:
Iitem |
Description |
|
Electrical Characteristics |
Chipset |
M8030-KT |
Frequency |
GPS L1, GLONASS L1, BEIDOU B1, GALILEO E1, SBAS L1, QZSS L1 |
|
Receiving Format |
GPS, GLONASS, BEIDOU, GALILEO, SBAS, QZSS. Default GPS, GLONASS, SBAS, QZSS. |
|
Channels |
72 Searching Channel |
|
Sensitivity |
Tracking |
-167dBm |
Reacquisition |
-160dBm |
|
Cold Start |
-148dBm |
|
Hot Start |
-156dBm |
|
Accuracy |
Position Horizontal |
2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky) |
Velocity |
0.1m/sec 95% (SA off) |
|
Timing |
1us synchronized to GPS time |
|
Acquisition Time |
Cold Start |
26s |
Warm Start |
25s |
|
Hot Start |
1s |
|
Data Output |
Support Rate |
4800bps to 921600bps, Default 9600bps |
Data Level |
TTL Level |
|
Data Protocol |
NMEA-0183 or UBX, Default NMEA-0183 |
|
NMEA Message |
RMC, VTG, GGA, GSA, GSV, GLL |
|
Update Rate |
1Hz-10Hz, Default 1Hz |
|
FLASH |
4M FLASH, Store the configuration permanently |
|
Operational Limits |
Altitude |
50,000m Max |
Velocity |
515m/s Max |
|
Acceleration |
Less than 4g |
|
Power Consumption |
VCC |
DC Voltage 3.0V-5.5V, Typical: 5.0V |
Current |
Capture 50mA/5.0V |
|
Mechanical Specifications |
Dimension |
22mm*20mm*8mm |
Weight |
8.3g |
|
Connector |
1.00mm 4pins connector |
|
Environment |
Operating Temp |
-40 °C ~ +85°C |
Storage Temp |
-40°C ~ +105°C |
|
LED |
Built-in LED |
TX LED: blue. The data output, TX LED flashing |
PPS LED: red. PPS LED not bright when GPS not fixed, flashing when fixed |
Pin Description:
PIN |
PIN Name |
I/O |
Description |
1 |
GND |
G |
Ground |
2 |
TX |
O |
Serial Data Output. |
3 |
RX |
I |
Serial Data Input. |
4 |
VCC |
I |
DC 3.0V - 5.5V supply input,Typical: 5.0V |
LED:
1.TX LED:blue.The data output, TX LED flashing
PPS LED:red.PPS LED not bright when GPS not fixed,flashing when fixed.
1x BN-220 GPS Module
2x 15cm Cable
Prices for Beitian BN-220H GPS in stores
Deals found: 1 ()