Join to our channels: new products, coupons, best deals:
FC F4 + ESC 4in1 Stacks
Diatone Mamba Basic F405 MK3 + F50_BLS 50A 4in1 6S ESC
Multirotors → FPV Racing drones → Flight controllers → F4 FCs → FC F4 + ESC 4in1 Stacks → Diatone Mamba F405 MK3 + 40A BLHeli_S 4in1 ESC → Diatone Mamba Basic F405 MK3 + F50_BLS 50A 4in1 6S ESCFixed
- Add I2C function
- When you connect the USB, the receiver and OSD settings can be saved
- Increase the pad area
- LED signal selection (when Mamba Led sys avaiable)
- BEC short circuit protection
- TVS instant high voltage protection 30V
Update
- F405 models support F.prot(Most)
- Upgrade the anti-interference cable
- Use Typec(Most)
- The pad area of Mini flight controller (20×20) increased by 140%
Added
- Add self-recovery insurance to the receiver's 5V power supply
- Increase the camera VCC power supply pad
- Standard flight controller (30.5×30.5) adds spare pad
- Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference
FC Specifications
- MAMBA Basic F405MK3
- MCU: 168MHz STM32F45RGT6
- GYRO: MPU6000
- Barometer: Yes
- OSD: Yes
- Blackbox: 16M Flash Memory
- Uarts: 6Set
- ESC Soft: Dshot300/600
- ESC Telemetry: Yes
- Power Led: Yes
- LED Controller: BF LED/MB LED(4 Set 2812 LED)
- S/F.Port: Yes
- RSSI: Yes
- Buzz: Yes
- Input: 3~6S Lipo (12.6~25.2V)
- TVS Protection: Yes
- BEC:3.3V 0.5A& 5V 3A ( (System Power)&5V 3A(LED)& 9V 3A
- MOUNTING: 30.5mm, M3
ESC Specifications
- MAMBA F50_BLS
- INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
- CONTINUE CURRENT:50A×4
- BURST CURRENT:60A (10S)
- BEC: No
- Target:BLHeli_S CH40
- SOFT: Dshot300/600
- TVS Protection: Yes
- MOUNTING: 30.5mm/M3
Supply :
- High-Frequency 470uF/35V ×1
- 8pin sh1.0 ×2
- 12AWG 100mm ×2
- AMASS Original XT60
Share
Prices for Diatone Mamba Basic F405 MK3 + F50_BLS 50A 4in1 6S ESC in stores
Deals found: 9 ()
See also
Diatone Mamba F50_BLS 50A 4in1 ESC
$44
Diatone Mamba F405 MK3 + 40A BLHeli_S 4in1 ESC
$98